After Viewing This Item, Customers Ultimately Buy:

15% of customers buy the item featured on this page.

page 

Description:

1. Turn off
①Power：Off, long press Play button for 5 seconds release key, a long red light 3 seconds to boot.②Shutdown：Play or pause mode, press the play button button release three seconds, the red light flashes 8 times automatically shut down.

2.Recording：
After booting, the switch in the ON position or the ON position (recording state), the red blinking light blinks 2 times for 3 seconds and turns off automatically after start recording.

3、Stop recording: switch toggle the opposite direction (voice music playback status), red flashing light 3 seconds automatically extinguished, that saved recordings.  Then you can directly press the play button  audio button to play the current file, press the button  the red light turned on one second, go to the previous one; press the down button  the red light one second, go to the next song.Play state, long press  volume down onthe turn, long press the down  volume amplification.

4.Voice Music Converter
Play audio files in the pause mode, press up  or page down , the red blinking light for 3 seconds, automatically converted into music files; also play music files, the pause mode, press up  or page down , the red blinking light for 3 seconds will be automatically converted to audio files.

5、 Charge
Into the PC USB port, charging indicator light when the normal light; charged, the indicator does not light.When the battery low voltage, LED will flash, prompting you to recharge.

6 、Long time recording, high-capacity polymer lithium battery supports continuous 12-hour recording

Note: The U-disk recorder for the audio input line, insert the headset for audio input state, this time can not be recorded, so the recording can not take the headset!

 
● Telephone recording connection method
 
● Light of the above diagram shows the external telephone line telephone connections and telephone connections access device.
● Plug one end of the telephone audio cable connectors, plug the other end of the line input jack.
● Phone recording, switch to recording mode for recording.
● To avoid recording failure in the test recording before you go.
●  Power lower than the normal operating voltage, not the normal recording, real-time charging.

Specifications:

Maximum recording time

135 HOURS/4GB FLASH@196KBPS
Maximum recording section 999
Microphone
Built-in Omni-directional stereo microphone

Battery power consumption
About 12 hours

Charging time
About 2 hours

Headphone output
>5mw x 2

Communication standards
USB2.0
SNR
>90dB
SIZE 66mmX22mmX6mm

Compression bit rate
196KBPS