Power Bank DVR Spy Camera
Thank you for choosing Power Bank DVR
(hereinafter referred to as the DVR)
Instruction
l The following pictures are provided for illustration only.
l This guide briefly describes the functions of the DVR. For details about how to set the software management, see Recording time setting..
l Place and operate the DVR in a ventilated area if the DVR is having prolonged use
l Please read carefully before operation, to ensure you have understood its operation
Getting to Know Your DVR
Two Colors Available: 鈼Silvery White 鈼 Black
Function
l This DVR is multifunction mobile power camera and has video & audio capability with motion detection.
l Note there is charging power bank functions and will charge electrical items (Including iPhone and Samsung cell phones and so on)
l This DVR can charge other electrical items while it is recording video & audio at the same time.
Feature:
l Highly concealed & mobile power bank functions
l Large capacity battery supports long time recordings
l One button operation, simple and convenient
l HD 720p and H.264 compression to save memory
l Support motion detection recording
l Easy to carry, but also for home security.
Installing the Micro SD card and back mirror plate
Install the memory card toward the lower left side of the chip on the opening as shown below and insert it into the card slot
Make sure DVR works well after you installed the memory card, and then stick the back mirror plate back.
Replace new memory card if necessary
Please find a knife or something else to open the back mirror plate of the DVR, and replace new memory card
Operation of DVR
锛1锛 Time Setting
l Turn off the DVR firstly
l Connect the DVR to your computer via USB cable
Open the removable disk on my computer (TF card锛
l Create a text file named "time.txt" in the root directory of your camera. The format of the time must be set in "YYYY.MM.DD HH:MM:SS"
l Save and Exit
l Disconnect the DVR from your Computer, restart the DVR and finish the setting
锛2锛 Power On
Press and Hold the power button approx 3sec till red light is ON.
锛3锛 Video Recording
Shortly press the power button when the Red light is ON (standby mode), then the red light flashes twice and goes off once DVR starts to record
锛4锛 Save Video
Shortly press the power button one time while recording, the red light will be on again, it becomes standby mode and video was saved
锛5锛 Motion detection Mode
In standby mode please keep pressing the power button for around 3 seconds and release, the blue light will flash twice and off, at the same time red light will go off, too.
When it detects any movement, the blue light will flash one time shortly and start recording. It will not record without detecting movement.
锛6锛 Save Video
Press the button one time shortly, video file will be saved and red light on, becomes to standby mode
锛7锛 Power Off
Under the standby mode, please keep pressing the power button for 6 seconds till the red and blue lights flash twice and off at the same time.銆
锛8锛 Reset
For the wrong operation or any other unknown reasons, there is no any feedback from DVR, please find one toothpick to press the reset pinhole beside the camera hole
锛9锛 Charge
Use the USB cable to connect DVR to PC to charge (approx takes 4锝6hours for full charge) or use AC adapter to charge. When charging, the red and blue light will continue flash, if the battery was full锛the red light will go off and blue light on. (100% indicator)
锛10锛 File storage and Replay
Please connect the DVR to your PC and read the video file to replay.
You can copy the video file and save it to your PC
Using media player which can support AVI format
锛11锛 Format the memory card
If you cannot access the memory card, please try a quick format. But please remember if you format the card, all your files will be deleted.
锛12锛 Recording time setting
Recording Video file time锛
Continuous record mode: 2 / 10minute per file锛
Motion detection mode: 10sec / 3min per file
You need to consult your local reseller for above setting
锛13锛 Mobile Power bank functions
Specifications
Pixels |
5.0 Mega CMOS |
Video Resolution |
1280*720 |
Video Format |
AVI ( H.264 ) |
FPS |
30fps |
View Angle |
90° |
Motion Detection Distance |
Direct 6 meters |
Low Illumination |
1LUX |
Battery Capacity |
3000MAH |
Recording Time |
More than 8 hours |
Motion Detection Time |
More than 48hours |
Recording Audio Area |
40銕 |
Power Consumption |
250MA/3.7V |
Store Temperature |
-20-80鈩 |
Operation Temperature |
-10-60鈩 |
Operation Humidity |
15-85%RH |
Memory |
Micro SD Card |
Max. |
32GB |
Data Transfer Interface |
USB1.1/2.0 |
Operation System |
XP/Vista32/Win7 |
Memory Consumption |
3GB/hour |
Charge Time |
Approx 4锝6 hours |
Output voltage/current |
5V/0.5A |
Daily USE
Charging the battery
Note: If you have not used the battery for a long time, Please charge it before use
Method1锛Charging by using the charger
Search Feedback
|